The TA-80 is a digital miniature wireless plug-on transmitter with balanced XLR mic input jack, designed for use with measurement microphones, condenser / dynamic wired microphones, recording microphones and musical instrument microphones . The TA-80 is compatible with MIPro ACT-8 Series receivers for premium sound quality.
Each TA-80 includes 1 (one) MPA-80 adapter for the MP-80 charging station. The MP-80 charging station is sold separately.
PLEASE NOTE: Rational Acoustics cannot sell this product outside of the USA. In addition, this product contains lithium ion batteries and due to FAA regulations this product is restricted to ground transportation within the lower 48 states. It cannot ship to Alaska, Hawaii or Puerto Rico.
- The TA-80 has a flat and wide frequency response, ultra-low T.H.D. and noise floor, fast transient response, strong anti-interference and high S/N ratio characteristics. These superior characteristics resolve the problems of tangling microphone cables and the deterioration of analog transmission characteristics, making the TA-80 the best system to reproduce the natural sound of any premium wired microphone.
- With the balanced XLR mic input jack for installing on any condenser microphone, the TA-80 also provides 8 gain levels and a built-in switchable 12 / 48V, up to 10 mA current load phantom power for condenser microphones. The phantom power can be switched off for use with dynamic microphones.
- A built-in high-capacity lithium battery enables a continuous 5 to 8 hours of use per charge. The TA-80 can be recharged by dropping it into the intelligent MP-80 charger or by removing the single battery cell from the TA-80 and placing it into the charger. The TA-80 has reverse polarity protection and battery replacement is fast and easy.
- The TA-80 is compact, lightweight and ruggedly built. The streamlined aluminum housing is splash-proof with strict isolation of spurious and external noise interference. It has a built-in high efficiency transmitting antenna and a green backlit LCD clearly displays operation parameters. The TA-80 is compatible with MIPRO’s ACT-80/80R miniature digital receivers for a variety of professional audio applications.
|Frequency Range||480 ~ 960 MHz (country dependent)|
|Switching Bandwidth||64 MHz|
|RF Output Power||10 mW / 50 mW switchable (country dependent)|
|Spurious Emission||≦ -60 dBc|
|Modulation Mode||New digital modulation|
|Modulation Type||Digital modulation fixed envelope|
|AF Input Level||2 V max. at AF gain = 0 dB
7 V max. at AF gain = -12 dB
20 V P-P by protective circuit
|Phantom Power||Selectable 12 V and 48 V at 10 mA max.|
|AF Frequency Response||20 Hz ~ 20 kHz, selectable 100 Hz low cut filter|
|Battery Type||1 × ICR 18500 lithium battery|
|Battery Life||> 8-hour for RF power at 10 mW and phantom power off.
> 4.5-hour for RF power at 50 mW and 48 V at 2 mA phantom power on.
|Charger||MP-8T / MP-80 (with an adaptor plug MPA-80)|
|Dimensions (W × H × D)||44 × 114 × 37 mm / 1.7 × 4.5 × 1.5 "|
|Net Weight||Approx. 165 g / 5.8 oz.|
|Note||Refer to actual product in the event of product discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.